tc7sa05f/fu 2002-12-13 1 toshiba cmos digital integrated circuit silicon monolithic tc7sa05f,TC7SA05FU inverter (open drain) with 3.6 v tolerant input and output features low voltage operation : v cc = 1.8~3.6 v high speed operation : t pd = 2.8 ns (max) (v cc = 3.0~3.6 v) : t pd = 3.7 ns (max) (v cc = 2.3~2.7 v) : t pd = 7.4 ns (max) (v cc = 1.8 v) high output current : i oh /i ol = 24 ma (min) (v cc = 3.0 v) : i oh /i ol = 18 ma (min) (v cc = 2.3 v) : i oh /i ol = 6 ma (min) (v cc = 1.8 v) latch-up performance : 300 ma or more esd performance : human body model > 200 v : machine model > 2000 v power down protection is provided on all inputs and outputs. maximum ratings (ta = 25c) characteristics symbol rating unit power supply voltage v cc ? 0.5~4.6 v dc input voltage v in ? 0.5~4.6 v ? 0.5~4.6 (note 1) dc output voltage v out ? 0.5~v cc + 0.5 (note 2) v input diode current i ik ? 50 ma output diode current i ok 50 (note 3) ma dc output current i out 50 ma power dissipation p d 200 mw dc v cc /ground current i cc 100 ma storage temperature range t stg ? 65~150 c note 1: v cc = 0 v note 2: high or low state. i out absolute maximum rating be observed. note 3: v out < gnd, v out > v cc tc7sa05f TC7SA05FU weight ssop5-p-0.95 : 0.016 g (typ.) ssop5-p-0.65a : 0.006 g (typ.)
tc7sa05f/fu 2002-12-13 2 marking pin assignment (top view) logic diagram truth table recommended operating range characteristics symbol rating unit 1.8~3.6 power supply voltage v cc 1.2~3.6 (note 4) v input voltage v in 0.3~3.6 v 0~3.6 (note 5) output voltage v out 0~v cc (note 6) v 24 (note 7) 18 (note 8) output current i oh /i ol 6 (note 9) ma operating temperature range t opr 40~85 c input rise and fall time dt/dv 0~10 (note 10) ns/v note 4: data retention only note 5: v cc 0 v note 6: high or low state note 7: v cc 3.0~3.6 v note 8: v cc 2.3~2.7 v note 9: v cc 1.8 v note 10: v in 0.8~2.0 v, v cc 3.0 v a y l *h h l * : high impedance in a 1 out y type name v e nc in a gnd 1 2 3 5 4 v cc out y
tc7sa05f/fu 2002-12-13 3 electrical characteristics dc characteristics (ta 40~85c, 2.7 v < v cc 3.6 v) dc characteristics (ta 40~85c, 2.3 v v cc 2.7 v) characteristics symbol test condition v cc (v) min max unit high level v ih 2.7~3.6 2.0 input voltage low level v il 2.7~3.6 0.8 v i ol 100 a 2.7~3.6 0.2 i ol 12 ma 2.7 0.4 i ol 18 ma 3.0 0.4 output voltage low level v ol v in v ih i ol 24 ma 3.0 0.55 v input leakage current i in v in 0~3.6 v 2.7~3.6 5.0 a power off leakage current i off v in , v out 0~3.6 v 0 10.0 a v in v cc or gnd 2.7~3.6 20.0 quiescent supply current i cc v cc (v in , v out ) 3.6 v 2.7~3.6 20.0 increase in i cc per input i cc v ih v cc 0.6 v 2.7~3.6 750 a characteristics symbol test condition v cc (v) min max unit high level v ih 2.3~2.7 1.6 input voltage low level v il 2.3~2.7 0.7 v i ol 100 a 2.3~2.7 0.2 i ol 12 ma 2.3 0.4 output voltage low level v ol v in v ih i ol 18 ma 2.3 0.6 v input leakage current i in v in 0~3.6 v 2.3~2.7 5.0 a power off leakage current i off v in , v out 0~3.6 v 0 10.0 a v in v cc or gnd 2.3~2.7 20.0 quiescent supply current i cc v cc (v in , v out ) 3.6 v 2.3~2.7 20.0 a
tc7sa05f/fu 2002-12-13 4 dc characteristics (ta 40~85c, 1.8 v v cc < 2.3 v) ac characteristics (ta 40~85c, input: t r t f 2.0 ns, c l 30 pf, r l 500 ) characteristics symbol test condition v cc (v) min max unit 1.8 1.0 8.2 2.5 0.2 0.8 4.1 t pzl figure 1, figure 2 3.3 0.3 0.6 3.5 ns 1.8 1.0 6.8 2.5 0.2 0.8 3.8 propagation delay time t plz figure 1, figure 2 3.3 0.3 0.6 3.5 ns for c l 50 pf, add approximately 300 ps to the ac maximum specification. characteristics symbol test condition v cc (v) min max unit high level v ih 1.8~2.3 0.7 v cc input voltage low level v il 1.8~2.3 0.2 v cc v i ol 100 a 1.8 0.2 output voltage low level v ol v in v ih i ol 6 ma 1.8 0.3 v input leakage current i in v in 0~3.6 v 1.8 5.0 a power off leakage current i off v in , v out 0~3.6 v 0 10.0 a v in v cc or gnd 1.8 20.0 quiescent supply current i cc v cc (v in , v out ) 3.6 v 1.8 20.0 a
tc7sa05f/fu 2002-12-13 5 dynamic switching characteristics (ta 25c, input: t r t f 2.0 ns, c l 30 pf) characteristics symbol test condition v cc (v) typ. unit v in 1.8 v, v il 0 v (note 11) 1.8 0.25 v in 2.5 v, v il 0 v (note 11) 2.5 0.6 quiet output maximum dynamic v ol v olp v in 3.3 v, v il 0 v (note 11) 3.3 0.8 ns v in 1.8 v, v il 0 v (note 11) 1.8 0.25 v in 2.5 v, v il 0 v (note 11) 2.5 0.6 quiet output minimum dynamic v ol v olv v in 3.3 v, v il 0 v (note 11) 3.3 0.8 ns v in 1.8 v, v il 0 v (note 11) 1.8 1.5 v in 2.5 v, v il 0 v (note 11) 2.5 1.9 quiet output minimum dynamic v oh v olp v in 3.3 v, v il 0 v (note 11) 3.3 2.2 ns note 11: parameter guaranteed by design. capacitive characteristics (ta 25c) characteristics symbol test condition v cc (v) typ. unit input capacitance c in 1.8, 2.5, 3.3 pf power dissipation capacitance c pd f in 10 mhz (note 12) 1.8, 2.5, 3.3 pf note 12: c pd is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. average operating current can be obtained by the equation. i cc (opr.) c pd ? v cc ? f in i cc
tc7sa05f/fu 2002-12-13 6 ac test circuit ac wareform figure 1 measure c l 30 pf r l 500
r l c l r l 6.0 v or v cc 2 figure 2 t pzl , t plz v cc symbol 3.3 0.3 v 2.5 0.2 v 1.8 v v ih 2.7 v v cc v cc v m 1.5 v v cc /2 v cc /2 v x v oh 0.3 v v oh 0.15 v v oh 0.15 v 90% 10% v ol 3.0 v or v cc gnd v ih v x t pzl 2.0 ns v m outputs disabled t plz outputs enabled outputs disabled v m 2.0 ns v m 90% 10% t r t f
tc7sa05f/fu 2002-12-13 7 package dimensions weight: 0.016 g (typ.)
tc7sa05f/fu 2002-12-13 8 package dimensions weight: 0.006 g (typ.)
tc7sa05f/fu 2002-12-13 9 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use
|
